Panasonic KX-T336/KX-TD500 Series Programming Software
Programming software for Panasonic KX-T336/KX-TD500v1 PBX

FAX | IVR | PBX
 |   |   | 
<< Back to Product Index
Programmator - Panasonic KX-T336/KX-TD500v1 PBX Programming Software for Windows

Programmator:

Panasonic KX-T336/KX-TD500v1 PBX

The Programmator is a programming tool for the Panasonic KX-T336 and Panasonic KX-TD500v1 PBX. It provides programming, management, and administration of the PBX'es. With Programmator you can adjust your PBX parameters from within the easy to understand graphical user interface.

Certainly, you can solve the same problem by thumbing through 500 pages of the KX-T336/KX-TD500v1 Installation Manual and using a proprietary phone, but this tool will make it a lot easier. Almost all PBX features can be easily changed using simple actions known to all Windows users. A built-in manual will help solving most common problems.

Features

  • change settings of the PANASONIC KX-T336/KX-TD500v1 office exchange, with the aid of convenient graphic interface
  • commands are grouped in accordance with functional area, making common operation of the exchange noticeably easier
  • save status of the exchange in a file on a disk - backup and restore status of the exchange after malfunctions or create several configurations for various conditions

System Requirements

  1. Windows 95/98ME, or NT/2000/XP operating system
  2. One free COM-port to be used for hookup of the exchange
  3. Null-modem connecting cable. More information in the Programmator Manual
  4. 1.5Mb of the disc space after installation

 The computer must have at least one free COM (RS232) port. This port will be used to connect your computer and the PBX.

Compatible PBX'es

The following Panasonic PBX'es are supported:
KX-T336 KX-TD500
(DSP v.1)
   
       

Important: This Programmator is not compatible with KX-TD500v2.

In 1999, the PANASONIC Company produced a 2nd version of the processor board for the KX-TD500 PBX. This board has a different programming protocol, which is not supported by this Programmator. To check if this program is for your PBX, try connecting it to the PBX. If you have the KX-TD500v2 PBX it will be unable to connect. If you have already programmed the PBX with a terminal program (for example, Telix, Procomm or HyperTerminal which is included in Windows), then you have an KX-TD500 of the 1st version and this program can be used with this PBX.

 

Click here if you need software for other Panasonic PBX'es, or for NEC or Samsung PBX.

 

$69.00

 

Order
Download
F.A.Q.
Screen Shot
 
Turn your PC into a phone answering center! Call Forward No Answer allows you to forward incoming calls to a predetermined number if the original number is not answered after a certain number of rings. This service can be turned on and off in most areas. To activate, press *92. To de-activate, press *93.